Servo Drivers ED 430


  • Supporting Communication protocols:RS-232,RS-485,CAN BUS, PROFIBUS DP.

  • Power Supply: AC220V±15%

  • Rated Load(KW): 0.1-1.57

  • Dimensions: 265X165X62, 265X165X97

Please select an option
Sales price without tax 571,00 €
Price / kg:
  ED430-0010-XA-G-000 ED430-0020-XA-G-000 ED430-0040-XA-G-000 ED430-0075-XA-G-000 ED430-0105-XA-S-000 ED430-0126-XA-S-000 ED430-0157-XA-S-000
Main supply voltage Single-phase AC220V±15% 3-phase AC220V±15%
Rated power frequency 50Hz~60Hz
Control power supply DC24±10% , 2A
Digital signal input DC24±10%, 10mA
Digital signal output DC24±10%, 0.5A
Analog signal input -10V~+10V
Rated load(KW) 0.1 0.2 0.4 0.75 1.05 1.26 1.57
Energy-consumed braking If the system generates an over-voltage alarm when it starts or stops sharply, add an external braking resistor to absorb the feedback energy of the motor, the minimum resistance for ED430 series is 27
Energy-consumed braking voltage DC385±5V
Over-voltage alarm voltage DC400±5V
Under-voltage alarm voltage DC210±5V
Dimensions mm (H×W×D) 265X165X62 265X165X97
Working environment
Weight 1.9Kg 3Kg
Operating temperature 0~40℃
Storage temperature -10~70℃
Humidity 5~85%
Contamination level 2
Protection level IP20
Installation environment Installed in a dust-free, dry, and lockable environment (in a electrical cabinet, for example)
Installation mode Vertical installation
Installation altitude No power limit under 1000m
Pressure 86~106kpa
General functions
Internal programmable An internal space of 16.5 KB is provided for 256 sequences, which can save a controller on some occasions
External I/O 3 external digital outputs (24V,0.5A),the target position to output or alarm output function can be implemented by internal programming8 external digital inputs, supporting internal sequence calling via the input interface and positioning function(input delay: about 1 ms; input current: about 4 mA)
Analog input One differential analog input, implementing control over motor speed and position by analog input; input voltage range ± 10V, input delay: about 0.1 ms
Analog output Two independent analog outputs, capable of monitoring the change of internal object
Comparator Four internal comparators, with the comparison results to be used to trigger program sequences
Timer Supporting the function of triggering sequences by timer or events
Counter Four groups of internal counters, which can be set to trigger sequences
Calculator An internal calculator can be used for data duplication, addition, subtraction, multiplication, and division, and logic operation
Internal oscilloscope The ECO2WIN software enables a user to monitor operation parameters such as speed, position and current on a PC
Encoder signal output function In a master/slave control mode, the motor encoder signal or master encoder signal can be the input for the slave signal encoder, with a maximum output frequency of 2 MHz
Master encoder signal input function Programmable to be pulse/direction signal control, CW/CCWW control, electronic gear or electronic cam control (5V signal), with a maximum input frequency of 2 MHz
Feedback signal Incremental A, B, Z , /A, /B, /Z signal
RS232 9.6K baud rate, supporting a maximum of 15 sites, and supporting direct communication with a PC with the ECO2WIN software, or direct communication with an eView touch screen or text
RS485 38.4K baud rate, supporting a maximum of 15 sites, and communication cables with a length up to 400M
CAN BUS Maximum baud rate of 1M, and supporting a maximum of 127 sites
PROFIBUS DP Maximum baud rate of 12M, and supporting a maximum of 127 sites


ED Servo System