2CM560
- Supply Voltage 24 ~ 50V DC
- Over Voltage Protection Above 85VDC
- Low Voltage Protection Below 15VDC
- Cooling Method (Cooling by Air)
- Operation Temperature 0º ~ +40º
- Operating Humidity 85% RH (No-Condensing or Water Drops)
- Weight 0.25Kg
- Communications;RS232/RS422/RS485
Description
| Technical Specifications | |
| Supply Voltage | 24VDC~50VDC |
| Over-Voltage Protection | Above 85VDC |
| Under-Voltage Protection | Below 15VDC |
| Phase Current | 1.8 to 6 (Unit: A) |
| Micro Step | 200~25600 Pulse/Rev, Total 15 Different Micro Steps |
| Adaptable Motor | 57 flange, 2-Phase Hybrid Stepper Motor |
| Input Signal | PLS(CW), DIR(CCW), FREE Signal; Input Voltage: 5-~24VDC, In- put Current: 8mA@5VDC, 12mA@24VDC> |
| Output Signal | ERR, Open Connector Output, Maximum Current: 100mA |
| Control Signal Mode | PLS+DIR; dual-pulse CW/CCW |
| Automatic Half Current | The Driver Will Reduce Phase Current of the Motor by A Half in 1.5 Seconds |
| Protection | Over/low Voltage Alarm, Over Current Alarm and Overheat Protection |
| Technical Specifications (Environment) | |
| Cooling Method | Cooling by Air |
| Operation Environment | Avoid the Environment with Great Amount of Metallic Powder, Oil Mist, or Erosive Gases |
| Operation Humidity | 85%, RH (Non-Condensing or Water Drops) |
| Operation Temperature | 0º C - +40º C |
| Storage Temperature | -20º C-~ +70º C |
| Weight (Net) | 0.25Kg |
| Dimensions | 118x75.5x25.4 mm |
| Ingress Protection | IP20 |