2CM525
- Supply Voltage 24 ~ 50V DC
- Over Voltage Protection Above 85VDC
- Low Voltage Protection Below 15VDC
- Cooling Method (Cooling by Air)
- Operation Temperature 0º ~ +40º
- Operating Humidity 85% RH (No-Condensing or Water Drops)
- Weight 0.25Kg
- Protection Level IP20
Description
Technical Specifications | |
Supply Voltage | 24VDC~50VDC |
Over-Voltage Protection | Above 85VDC |
Under-Voltage Protection | Below 15VDC |
Phase Current | 1-4.5 (Unit: A) |
Micro Step | 200~25600 Pulse/rev, Total 15 Different Micro Steps |
Adaptable Motor | 57 Flange, 2-Phase Hybrid Stepper Motor |
Input Signal | PLS(CW), DIR(CCW), FREE signal; Input Voltage: 5-~24VDC, Input Current: 8mA@5VDC, 12mA@24VDC> |
Output Signal | ERR, Open Connector Output, Maximum Current: 100mA |
Control Signal Mode | PLS+DIR; dual-pulse CW/CCW |
Automatic Half Current | The Driver Will Reduce Phase Current of the Motor by A Half in 1.5 Seconds |
Protection | Over/low Voltage Alarm, Over Current Alarm and Overheat Protection |
Technical Specifications (Environment) | |
Cooling Method | Cooling by Air |
Operation Environment | Avoid the Environment with Great Amount of Metallic Powder, Oil Mist, or Erosive Gases |
Operation Humidity | 85%, RH (Non-Condensing or Water Drops) |
Operation Temperature | 0º C - +40º C |
Storage Temperature | -20º C-~ +70º C |
Weight (Net) | 0.25Kg |
Dimensions | 118x75.5x25.4 mm |
Ingress Protection | IP20 |